H43P65 and H43P65V
The Handler IV is the king of batch induction systems with its larger liquid volume and incredible agitation capability. The H43P65V comes complete with a total drainage tank, Banjo 3” pump, a dual inlet venturi for bulk chemical induction, twin agitation lines, two 16” hinged lids (one with the Handler Knife and one without), container and tank rinsing nozzles, a 4-way forkliftable steel frame, and a pump containment tray. Using closed loop recirculation through the exclusive dual inlet venturi, this model is able to induct bulk chemical into the Handler tank without your sprayer needing to be there! Whether it is high volumes of liquid pesticides or large amounts of dry flowables needing to be agitated, a Handler IV can do it all before your sprayer is back to be filled.
Dry AMS (ammonium sulfate) users may be interested in even more agitation. The similar model H43P65 replaces the venturi with a second 2” full port agitation line and provides agitation strong enough to dissolve even AMS that is not spray-grade. Features include:
- Twin agitation lines.
- Comes with The Handler knife.
- Closed loop recirculation and agitation.
- Full 10L/20L container emptying and rinsing capabilities.
- Dual inlet venturi for driving bulk chemical into the Handler or direct to sprayer fill line.
QUICK SPECIFICATIONS
- 230 US GAL/870L
- 3” CAMLOCK CONNECTIONS
- TWO X 16” HINGED AND LOCKABLE LID
- 2” DUAL INLET VENTURI
- ROTACRAFT TANK RINSING NOZZLE
- 3” BANJO /GX200 HONDA
H43P13V
Taking advantage of the new high-volume pumps available today, the H43P13V reduces sprayer fill time yet again. With bypass rates of 350 GPM made possible by the 3” Hypro polypropylene pump, this is the fastest Handler IV yet. In addition to the increased bypass speed, the pump provides higher pressures and creates even greater agitation than the H43P65V. Using closed loop recirculation through the exclusive dual inlet venturi, this model is able to induct bulk chemical into the Handler tank without your sprayer needing to be there! Whether it is high volumes of liquid pesticides or large amounts of dry flowables needing to be agitated, a Handler IV can do it all before your sprayer is back to be filled.
The Honda GX390 engine comes standard with an electric start. Instructions on proper cabling are included for connection to your own battery or 12V power source. Even if your power is down, Honda’s trademark easy-starting engines with built-in decompression can be started with the manual recoil. Features include:
- Dual inlet venturi for drawing bulk chemical into the Handler or direct to sprayer fill line.
- Full 10L/20L container emptying and rinsing capabilities.
- Comes with the original Handler knife.
- Twin agitation lines.
- Closed-loop recirculation and agitation.
- 350 GPM (1325 LPM) bypass rates.
QUICK SPECIFICATIONS
- 230 US GAL/870L
- 3” CAMLOCK CONNECTIONS
- TWO X 16” HINGED AND LOCKABLE LID
- 2” DUAL INLET VENTURI
- ROTACRAFT TANK RINSING NOZZLE
- 3” HYPRO /GX390 HONDA
HANDLER RESOURCES
