2” and 3” Polypropylene pumps are a cost-effective and reliable alternative to cast aluminum and cast iron pumps and are preferable in many corrosion-pumping applications.
BANJO PUMPS
- Self-priming
- Precision molded construction – increased strength
- Corrosion resistance – for a wider variety of liquids
- Low maintenance – results in less downtime
- Lightweight – very portable
- Superior design to other polypropylene pumps
- Better performance • EPDM standard, FKM and Buna N seals available – the right seal for the liquid being moved
| PART | SIZE (IN) | ENGINE | MAX GPM |
| 60-55020 | 2 | HONDA GC160 | 216 |
| 60-55520-OA | 2 | HONDA GX160 | 216 |
| 60-56520-OA | 2 | HONDA GX200 | 216 |
| 60-5552M-OA* | 2 | HONDA GX160 | 216 |
| 60-55530-OA | 3 | HONDA GX160 | 293 |
| 60-56530-OA | 3 | HONDA GX200 | 293 |
| 60-5653M-OA* | 3 | HONDA GX200 | 293 |
| 86-56530-OAW | 3 | SUPER B PUMP 6.5 | 293 |
BANJO WET SEAL PUMPS
The NEW Wet Seal 2” and 3” Banjo polypropylene pumps give much-needed dry-run capabilities to users who risk burning out their pumps seals by running them dry. The pump lubricates and cools the mechanical seal, preventing pump failure that can result in expensive repairs and possible engine damage.
| PART | SIZE (IN) | ENGINE | GPM |
| 60-55520-OAW | 2 | HONDA GX160 | 216 |
| 60-56530-OAW | 3 | HONDA GX200 | 293 |
| 26-300POW6 | 3 | WET END SEAL PUMP KIT 3/4 |
PACER PUMPS
- Self-priming
- Excellent durability, strength and resistance to chemicals & fertilizer. 200°F maximum temperature
- ALL metal fasteners are made of Stainless Steel
- EPDM O-rings and seals
- Powered by Honda GX & GC Series Engines for the highest level of reliability
- PROTEK engine protection kits are available for the fertilizer industry
| PART | SIZE (IN) | ENGINE | MAX GPM |
| PP77004 | 2 | HONDA GC160 | 250 |
| PP77003 | 2 | HONDA GX160 | 250 |
| PP77005 | 3 | HONDA GX160 | 300 |
| PP77006 | 3 | HONDA GX200 | 300 |
| 62-50000HD | HEAVY DUTY PUMP FRAME |
| 62-50000ZR | PUMP ACCESSORY MOUNTING RAILS |
PACER PROTEK SELF DEFENSE KIT
- An adapter the provides separation between the pump and the engine
- Oversized slinger to prevent any liquid from contacting the engine
- Extra large weep hole
- Large cavity to handle even the most catastrophic seal failure
- Available as a retrofit kit or as original equipment on new pump orders
| PART | SIZE (IN) | ENGINE | GPM |
| PP77004-P | 2 | HONDA GC160 | 250 |
| PP77003-P | 2 | HONDA GX160 | 250 |
| PP77005-P | 3 | HONDA GX160 | 300 |
| PP77006-P | 3 | HONDA GX200 | 300 |
| 58-0015 | PROTEK RETRO KIT ONLY |