POWERFLO DIAPHRAGM PUMPS
2200 SERIES
- 2 chamber positive displacement diaphragm pump.
- Self priming & capable of running dry.
- Maximum pressure: 40 psi.
- Maximum recommended temperature: 110°F
- Capacity: 1 US Gpm
- 12 VDC with 2-pin molded connector.
- 3/8” hose barb inlet & outlet ports.
7800 SERIES
- 3 chamber positive displacement diaphragm pump.
- Self priming & capable of running dry.
- Maximum pressure: 60 psi.
- Maximum recommended temperature: 140°F
- Capacity: 1.2 or 2.0 US Gpm
- 12 VDC with 2-pin molded connector.
- 3/8” FPT inlet & outlet ports.
5800 SERIES
- 5 chamber positive displacement diaphragm pump.
- Self priming & capable of running dry.
- Maximum pressure: 100 psi.
- Maximum recommended temperature: 140°F
- Capacity: 3.0, 3.6, 4.0 or 5.0 US Gpm
- 12 VDC with 2-pin molded connector.
- 1/2” FPT inlet & outlet ports.
| PART | DESCRIPTION |
| 2200-101 | 1 US GPM DEMAND PUMP; 40 PSI; 3/8” HB |
| 7811-201 | 1.2 US GPM DEMAND PUMP; 60 PSI; 3/8” FPT |
| 7812-201 | 2 US GPM DEMAND PUMP; 60 PSI; 3/8” FPTWWW |
| 5830-201C | 3 US GPM DEMAND PUMP; 45 PSI; 1/2” FPT |
| 5836-104E | 3.6 GPM DEMAND PUMP, 12 V WITH CORD, 60 PSI |
| 5836-201C | 3.6 US GPM DEMAND PUMP; 45 PSI; 1/2” FPT |
| 5840-201C | 4.0 US GPM DEMAND PUMP; 45 PSI; 1/2” FPT |
| 5850-101C | 5.0 US GPM DEMAND PUMP; 45 PSI; 1/2” FPT |
| 5850-104E | 5.0 US GPM DEMAND PUMP; 115V WITH CORD |
| 5850-201E | 5.0 US GPM DEMAND PUMP; 60 PSI; 1/2” FPT |
| 7870-101E | 7.0 US GM, 1/2” FPT, 12 VOLT, 60 PSI |
JOHN BLUE 12-VOLT PUMPS
- The John Blue 12-Volt Pump is the only 12-Volt pump on the market today totally protected against weather, dust and overspray – it’s weatherproof tested.
- Two models are available with 4.8 GPM capacity.
- Weatherproof tested—the only 12-Volt Pump to be totally protected against weather, dust and overspray.
- Four piston diaphragm for a smoother flow.
- Available quick connect ports system means it’s faster to install, requires fewer parts and connections while reducing the number of potential leak points.
- Integral pressure switch is fully sealed.
- Low current draw results in a longer battery life.
- Maximum operating pressure – 45 PSI.
- Automatic demand.
- Chemical resistant construction suitable for most fertilizers and chemicals.
- Santoprene® diaphragms and valves.
- Viton® seals.
- Glass-filled polypropylene housing.
- Strainer is made from polycarbonate, 316 stainless steel 50 mesh screen.
- 1-year warranty
| PART | DESCRIPTION |
| AP1819W | 4.8 GPM, MAX AMP DRAW 13 AMPS, WEIGHT 6.4 LBS., INLET/OUTLET PORTS 1/2” NPT MALE, MIN WIRE SIZE 12 AWG. |