H32P55
After 25 years, the H32P55 remains one of the best-selling models in the entire Handler lineup. A larger 70 US gallon tank allows for handling higher volumes of dry flowables and powders which can be easily mixed into solution with the integrated pump and closed loop recirculation. Full functionality includes: Handler tank filling and agitation, closed loop recirculation, dual inlet venturi draw from your choice of Handler tank or bulk containers, 10L & 20L container emptying and rinsing, tank rinsing, a wash line, and of course water transfer to the sprayer tank.
All the functionality with a larger tank, combined with cost effective 2” plumbing and pump, make the H32P55 a steady favorite on the farm. Features include:
- Full 10L/20L container emptying and rinsing capabilities.
- Dual inlet venturi and bulk draw capabilities.
- Integrated transfer pump.
- Comes with the original Handler knife.
- Closed loop recirculation and agitation.
- Tank emptying by venturi or direct pump draw.
Note: The H32 model is identical, but excludes the pump.
QUICK SPECIFICATIONS
- 70 US GAL/275L
- 2” CAMLOCK CONNECTIONS
- 16” HINGED AND LOCKABLE LID
- 2” DUAL INLET VENTURI
- 2” BANJO PUMP/GX200 HONDA ENGINE (exculded on H32 model)
- ROTACRAFT TANK RINSING NOZZLE
H33
The H33 is the super-sized version of the popular H23. With its larger tank it is perfect for handling everything from dry flowables, to 10L and 20L containers, to bulk containers. Water is simply pumped to the inlet of the H33 which provides the flow to agitate and fill the tank, empty and rinse containers, power the dual inlet venturi, rinse the tank, and of course transfer water to your sprayer tank. The Handler exclusive dual inlet venturi comes plumbed to draw from your choice of the Handler tank or your bulk containers, directly into your sprayer fill line.
The full 3” bypass line on the H33 is designed to handle the rigors of any pump with capacities of up to 280 GPM (1060 LPM) without concern for pressure. Banjo’s sweep elbows are used to eliminate as much line turbulence as possible. To ensure this larger tank size can be thoroughly cleaned, all H3 models incorporate the Rotacraft tank cleaning nozzle. Features include:
- Dual inlet venturi and bulk draw capabilities.
- Full 10L/20L container emptying and rinsing capabilities.
- Durable 3” bypass for flows up to 280 GPM (1060 LPM).
- Comes with the original Handler knife.
QUICK SPECIFICATIONS
- 70 US GA70 US GAL/275L
- 3” CAMLOCK CONNECTIONS
- 16” HINGED AND LOCKABLE LID
- 2” DUAL INLET VENTURI
- ROTACRAFT TANK RINSING NOZZLE
H33P65
The H33P65 has been the most popular on-farm model for many years. The large 70 US gallon tank combined with the steep cone tank, agitation nozzle, and dual inlet venturi make this the most versatile of all Handlers. With capacity to agitate larger volumes of dry products the H33P65 is commonly found in areas where high volumes of AMS are used. Due to the larger tank size, a Rotacraft tank rinsing nozzle has been added to Handler III models to ensure proper cleanout when switching chemicals.
Designed specifically to work with a Banjo 3″ polypropylene pump powered by a Honda GX200 engine, water bypass rates are accomplished with almost no reduction in flow your sprayer. Features include:
- Full 10L/20L container emptying and rinsing capabilities.
- Dual inlet venturi and bulk draw capabilities.
- Integrated transfer pump.
- Comes with the original Handler knife.
- Closed loop recirculation and agitation.
- Tank emptying by venturi or direct pump draw.
QUICK SPECIFICATIONS
- 70 US GAL/275L
- 3” CAMLOCK CONNECTIONS
- 16” HINGED AND LOCKABLE LID
- 2” DUAL INLET VENTURI
- 3” BANJO PUMP/GX200 HONDA ENGINE
- ROTOCRAFT TANK RINSING NOZZLE
H33HD
The H33HD has been designed specifically to work with new 3” pumps being made with flows in excess of 280 GPM (1060 LPM). At these flow rates, water in 3” plumbing moves in a fully turbulent motion and creates significant line pressures and risk of water hammer. Engine power requirements increase with these pumps and so does the need to match your chemical inductor properly.
With a re-designed bypass line free of directional changes, the H33HD takes full advantage of your pump’s flow potential. As a safety precaution against the higher operating pressures, the H33HD is also equipped with a pressure spike relief valve to prevent water hammer damage. Maximize the performance of your high volume 3” pump without sacrificing safety by using the purpose built H33HD. Your Handler dealer will be glad to help determine when the H33HD is the right Handler for you. Features include:
- Uni-directional bypass line for maximum flow.
- Pressure spike relief valve to prevent damage.
- Full 10L/20L container emptying and rinsing capabilities.
- Dual inlet venturi and bulk draw capabilities.
- Comes with the original Handler knife.
QUICK SPECIFICATIONS
- 70 US GAL/275L
- 3” CAMLOCK CONNECTIONS
- 16” HINGED AND LOCKABLE LID
- 2” DUAL INLET VENTURI
- ROTOCRAFT TANK RINSING NOZZLE
H33HDP13
The H33HDP13 utilizes Hypro’s 3” polypropylene pump and the proven Honda GX390 (13HP) engine complete with electric start. Sprayer fill time is minimized with Handler bypass flow rates of 350 GPM (1325 LPM) thanks to the Hypro pump and our HD purpose built plumbing. 3” flow rates this high create higher operating pressures and the H33HDP13 is designed to handle them. The pressure spike relief valve eliminates any risk of water hammer which ensures operator safety along with protecting your equipment.
Even though the plumbing arrangement is different from other H2 and H3 Handlers, the H33HDP13 maintains all of the functionality you’ve come to expect in a Handler, including sprayer filling container emptying and rinsing, venturi based bulk chemical induction, tank emptying with venturi or direct pump draw, closed loop circulation and agitation, and wash line. Features also include:
- Uni-directional bypass line for maximum flow.
- Pressure spike relief valve to prevent damage.
- Full 10L/20L container emptying and rinsing capabilities.
- Dual inlet venturi and bulk draw capabilities.
- Comes with the original Handler knife.
- 350 GPM (1325 LPM) bypass rates.
QUICK SPECIFICATIONS
- 70 US GAL/275L
- 3” CAMLOCK CONNECTIONS
- 16” HINGED AND LOCKABLE LID
- 2” DUAL INLET VENTURI
- ROTACRAFT TANK RINSING NOZZLE
- 3” HYPRO PUMP/GX390 HONDA
- ELECTRIC START (12V POWER NOT INCLUDED)
HANDLER RESOURCES
