Hypro Roller Pumps

Hypro roller pumps are the number one all-around choice by farmers throughout the world. The rollers (from 4 to 8, depending on the model) revolve inside the pump housing to force the spray solution through the outlet to the nozzle. Roller pumps have a low initial cost and are extremely versatile. They operate efficiently at PTO speeds of 540 and 1000 rpm and have a wide pressure range of up to 300 psi and flow rates of 2 to 62 gpm. Roller pumps are self priming and easily adapt to PTO or gas engine drives. Specific seal, roller and casting materials can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.

1502 Series – 6 Roller Pump

Performance Information

  • Max. flow: 33.1 gpm/125 lpm at 540 rpm | 62.1 gpm/235 lpm at 1000 rpm
  • Max. pressure: Continuous 100 psi/6.9 bar | Intermittent 150 psi/10.3 bar
  • Max. rated speed: 1000 rpm
  • Max. fluid temperature: 140°F/60°C

Housing and Rotor Material Options

  • Cast Iron housing and rotor are intended for use in common agricultural spraying applications – compatible with most insect, pest, brush and weed control chemicals
  • Ni-Resist housing and rotor provide improved corrosion resistance over cast iron models – compatible with all of the above, PLUS fumigants, powdered and liquid fertilizers
  • Silver Series XL housing and rotor provide the best corrosion resistance and are ready for use with Roundup® – compatible with all of the above, PLUS glyphosates and acids

Other Attributes

  • Super Rollers™ provide the chemical resistance of polypropylene and the life of nylon (Poly and Teflon rollers available)
  • Buna-N seals (standard on Cast Iron and Ni-Resist models); Viton® seals provide the best overall chemical resistance (standard on Silver Series XL models)
  • Counter-clockwise shaft rotation for easy PTO adaption (Clockwise available for gas engines)
  • 15?16″ solid stainless steel shaft for corrosion resistance
  • 1 1?2″ NPT ports fit most existing sprayer plumbing systems
  • PTO adapters/couplers are available (forged steel recommended)
  • Weight: 30 lbs./13.6 kg

1700 Series – 5 Roller Pump

Performance Information

  • Max. flow: 25 gpm/94.6 lpm at 540 rpm | 45 gpm/170 lpm at 1000 rpm
  • Max. pressure: Continuous 100 psi/6.9 bar | Intermittent 200 psi/13.8 bar
  • Max. rated speed: 1000 rpm
  • Max. fluid temperature: 140°F/60°C

Housing and Rotor Material Options

  • Cast Iron housing and rotor are intended for use in common agricultural spraying applications – compatible with most insect, pest, brush and weed control chemicals
  • Ni-Resist housing and rotor provide improved corrosion resistance over cast iron models – compatible with all of the above, PLUS fumigants, powdered and liquid fertilizers
  • Silver Series XL housing and rotor provide the best corrosion resistance and are ready for use with Roundup® – compatible with all of the above, PLUS glyphosates and acids

Other Attributes

  • Super Rollers™ provide the chemical resistance of polypropylene and the life of nylon (Poly and Teflon rollers available)
  • Viton® seals provide the best overall chemical resistance (Buna-N seals available)
  • Counter-clockwise shaft rotation for easy PTO adaption (Clockwise available for gas engines)
  • 15?16″ solid stainless steel shaft for corrosion resistance
  • 1″ NPT ports fit most existing sprayer plumbing systems
  • PTO adapters/couplers are available (forged steel recommended)
  • Recommended PTO torque arm kit 3430-0540
  • Weight: 19 lbs./8.6 kg

4001/4101 Series – 4 Roller Pumps

Performance Information

  • Max. flow: 9.1 gpm/34.4 lpm at 1800 rpm
  • Max. pressure: Continuous 100 psi/6.9 bar | Intermittent 150 psi/10.3 bar
  • Max. rated speed: 1800 rpm
  • Max. fluid temperature: 140°F/60°C

Housing and Rotor Material Options

  • Cast Iron housing and rotor are intended for use in common agricultural spraying applications – compatible with most insect, pest, brush and weed control chemicals
  • Ni-Resist housing and rotor provide improved corrosion resistance over cast iron models – compatible with all of the above, PLUS fumigants, powdered and liquid fertilizers
  • Silver Series XL housing and rotor provide the best corrosion resistance and are ready for use with Roundup® – compatible with all of the above, PLUS glyphosates and acids

Other Attributes

  • Super Rollers™ provide the chemical resistance of polypropylene and the life of nylon (Poly, Teflon and Buna-N rollers available)
  • Viton® seals provide the best overall chemical resistance (Buna-N seals available)
  • Clockwise shaft rotation directly couples to gas engines (Counter-clockwise available for PTO adaption)
  • 5/8″ solid stainless steel shaft for corrosion resistance (1/2″ hollow shaft available)
  • 3/4″ NPT ports fit most existing sprayer plumbing systems
  • Shaft adapters/couplers are available
  • Special torque arm and base kit is available for gas engines
  • Weight: 5 lbs./2.27 kg

6500 Series 6 Roller Pump

Performance Information

  • Max. flow: 9.7 gpm/36.7 lpm at 540 rpm | 18.2 gpm/68.9 lpm at 1000 rpm | 21.8 gpm/82.5 lpm at 1200 rpm
  • Max. pressure: Continuous 100-150 psi/6.9-10.3 bar | Intermittent 300 psi/20.7 bar
  • Max. rated speed: 1200 rpm
  • Max. fluid temperature: 140°F/60°C

Housing and Rotor Material Options

  • Cast Iron housing and rotor are intended for use in common agricultural spraying applications – compatible with most insect, pest, brush and weed control chemicals
  • Ni-Resist housing and rotor provide improved corrosion resistance over cast iron models – compatible with all of the above, PLUS fumigants, powdered and liquid fertilizers
  • Silver Series XL housing and rotor provide the best corrosion resistance and are ready for use with Roundup® – compatible with all of the above, PLUS glyphosates and acids

Other Attributes

  • Super Rollers™ provide the chemical resistance of polypropylene and the life of nylon (Poly, Teflon and Buna-N rollers available)
  • Viton® seals provide the best overall chemical resistance (Buna-N seals available)
  • Counter-clockwise shaft for easy PTO adaption (Clockwise available for gas engines)
  • 5/8″ solid stainless steel shaft for corrosion resistance (1/2″ hollow shaft available)
  • 3/4″ NPT ports fit most existing sprayer plumbing systems
  • 1″ hose barb inlet fitting for 1000 rpm operation
  • PTO adapters/couplers are available
  • Recommended PTO torque arm kit: 3430-0540
  • Weight: 9 lbs./4.1 kg

7560 Series 8 Roller Pump

Performance Information

  • Max. flow: 12 gpm/45.4 lpm at 540 rpm | 22.5 gpm/85.2 lpm at 1000 rpm
  • Max. pressure: Continuous 100 psi/6.9 bar | Intermittent 300 psi/20.7 bar
  • Max. rated speed: 1000 rpm
  • Max. fluid temperature: 140°F/60°C

Housing and Rotor Material Options

  • Cast Iron housing and rotor are intended for use in common agricultural spraying applications – compatible with most insect, pest, brush and weed control chemicals
  • Ni-Resist housing and rotor provide improved corrosion resistance over cast iron models – compatible with all of the above, PLUS fumigants, powdered and liquid fertilizers
  • Silver Series XL housing and rotor provide the best corrosion resistance and are ready for use with Roundup® – compatible with all of the above, PLUS glyphosates and acids

Other Attributes

  • Super Rollers™ provide the chemical resistance of polypropylene and the life of nylon (Poly, Teflon and Buna-N rollers available)
  • Viton® seals provide the best overall chemical resistance (Buna-N seals available)
  • Counter-clockwise shaft rotation for easy PTO adaption (Clockwise available for gas engines)
  • 15?16″ solid stainless steel shaft for corrosion resistance
  • 3/4″ NPT ports fit most existing sprayer plumbing systems
  • 1″ hose barb inlet fitting for 1000 rpm operation
  • PTO adapters/couplers are available
  • Recommended PTO torque arm kit: 3430-0540
  • Weight: 13 lbs./5.89 kg

7700 Series 7 Roller Pump

Performance Information

  • Max. flow: 14.2 gpm/53.7 lpm at 540 rpm | 22.1 gpm/83.6 lpm at 800 rpm
  • Max. pressure: Continuous 100 psi/6.9 bar | Intermittent 200 psi/13.8 bar
  • Max. rated speed: 800 rpm
  • Max. fluid temperature: 140°F/60°C

Housing and Rotor Material Options

  • Cast Iron housing and rotor are intended for use in common agricultural spraying applications – compatible with most insect, pest, brush and weed control chemicals
  • Ni-Resist housing and rotor provide improved corrosion resistance over cast iron models – compatible with all of the above, PLUS fumigants, powdered and liquid fertilizers
  • Silver Series XL housing and rotor provide the best corrosion resistance and are ready for use with Roundup® – compatible with all of the above, PLUS glyphosates and acids

Other Attributes

  • Super Rollers™ provide the chemical resistance of polypropylene and the life of nylon (Poly, Teflon and Buna-N rollers available)
  • Viton® seals provide the best overall chemical resistance (Buna-N seals available)
  • Counter-clockwise shaft rotation for easy PTO adaption (Clockwise available for gas engines)
  • 15?16″ solid stainless steel shaft for corrosion resistance
  • 3/4″ NPT ports fit most existing sprayer plumbing systems
  • PTO adapters/couplers are available
  • Recommended PTO torque arm kit: 3430-0540
  • Weight: 14 lbs./6.36 kg

© Copyright - Polywest | Liquid Handling Products